frame relay encapsulation type
Diagram: R2 (Spoke with fr cisco)——-R1 (hub)——–R3 (spoke with FR IETF)
The Scenario here is that R1 is HUB and R2 & R3 are Spokes If we look at configurations below, the encapsulation type on R2(spoke) is Frame-relay IETF. The interface encapsulation on FR switch is set to FR-IETF for interface connected to R2. So when we do our configuration on R1 and R3, should we use IETF on the static mapping towards R2 or should we leave it like the way it is in the configuration. Can some one kindly help me out through this. I shall be grateful ————– configs: R1 HUB interface s0/0 encapsulation frame-relay ip add 10.0.0.1 255.255.255.0 no frame-relay inverse arp frame-relay map ip 10.0.0.2 102 broadcast frame-relay map ip 10.0.0.3 103 broadcast R2 Spoke interface s0/0 ip address 10.0.0.2 255.255.255.0 encapsulation frame-relay IETF no frame-relay inverse arp frame-relay map ip 10.0.0.1 201 broadcast frame-relay map ip 10.0.0.3 201 R3 Spoke interface s0/0 ip address 10.0.0.3 255.255.255.0 encapsulation frame-relay no frame-relay inverse arp frame-relay map ip 10.0.0.1 301 broadcast frame-relay map ip 10.0.0.2 301
— _______________________________________________
Search for businesses by name, location, or phone number. -Lycos Yellow Pages
http://r.lycos.com/r/yp_emailfooter/http://yellowpages.lycos.com/default.asp?SRC=lycos10
Category: CCIE Study
