RIP protocol small but confusing
Thanks scott and workerbee for your advise on this
—–Original Message—– From: Scott Morris [mailto:swm@emanon.com] Sent: 17 July 2006 15:04 To: Hafizur Rahman (UK); ccielab@groupstudy.com Subject: RE: RIP protocol small but confusing
Why not use distribute-lists? Either inbound or outbound….
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hi rp_r /rte_pih.htm#wp1122527
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE #153, CISSP, et al. CCSI/JNCI-M/JNCI-J smorris@ipexpert.com http://www.ipexpert.com
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Hafizur Rahman (UK) Sent: Monday, July 17, 2006 9:53 AM To: ccielab@groupstudy.com Subject: RE: RIP protocol small but confusing
Thank for every ones reply
So I take it there is no way I can prevent RIP to advertise all 4 interfaces ip address to its neighbor. Right?
Thanks
Hafi
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Hafizur Rahman (UK) Sent: 17 July 2006 13:00 To: ccielab@groupstudy.com Subject: RIP protocol small but confusing
Hi
I am trying to understand RIP well.
I have got a router which has got 4 interface all are running major network 20.20.0.0. Now I want to enable RIP only on 2 interfaces.
How can I accomplish this? I know with Passive-interface it will not send out update but will receive update.
Router rip
Ver 2
No au
Netw 20.0.0.0 Whit this config it is sending out all 4 interfaces to other routers. Any help
Thanks in advance
Hafi
Sheikh Rahman Support Engineer Dimension Data United Kingdom Dimension Data House Building 2 , Waterfront Business Park Hampshire GU51 3QT +44 12 5277 9330 Office +44 12 5277 9010 Fax hafizur.rahman@uk.didata.com
For further information about Dimension Data, please go to www.dimensiondata.com —————————————– Dimension Data - providing global IP based solutions and services for over 20 years supported locally from a single point of contact
This email is confidential. If you are not the intended recipient then you must not copy it, forward it, use it for any purpose, or disclose it to another person.
Please also note that the author of this email is not authorised to; make any offers capable of acceptance unless expressly stated in a validly dated and attached document which shall be subject to the terms and conditions stated therein or, conclude any contract on behalf of Dimension Data by email.
Although Dimension Data has taken reasonable precautions to ensure no viruses are present in this email, the company cannot accept responsibility for any loss or damage arising from the use of this email or attachments.
Category: CCIE Study
